Research Group Members

Aero-Acoustics Research (A-AR) – Dr. Joana Rocha’s Research Group →

Research Group Members and Alumni Researchers:

Member	Research
Tanya Chang	“Aerodynamic and Acoustic Characterization of a Closed-Loop Wind Tunnel”
Caleb Ramsay	“Acoustic Assessment of Riblets through High-Speed Wind Tunnel Testing”
Behzad Amirsalari	“The Optimization of Wing Leading and Trailing Edges Design for Noise and Drag Reduction”
Noah Veenstra	“Computational Optimization of Composite Structures for Noise Reduction”
Nick Cunnington-Bourbonniere	“Development of an Experimental Setup for Aeroacoustic��Testing of Porous Surfaces in a Low-Speed Wind Tunnel”,
Justin Denne	“Aerodynamic Characterization of a Closed-Loop Semi-Open Wind Tunnel using Experimental and Computational Methods”,
Zachary Huffman	“Derivation of an Empirical Model to Estimate the Power Spectral Density of Turbulent Flow Wall Pressure Fluctuations Using Machine Learning Regression Techniques”,
Jacques Tamayo	“Reduction of Sonic Boom Loudness Level in Supersonic Aircraft by Optimization of Wing Geometry and Positioning”
John Halpenny	“Minimizing Sonic Boom Noise to Meet Potential Regulatory Limits”
Victoria Asi	“Wind Tunnel Testing to Evaluate Noise in a Small Wind Turbine” (co-supervised with Dr. Rob Langlois and Dr. Fred Afagh),
Nicholas Thomson	“Modelling of Wall Pressure Fluctuations Induced by Turbulent Boundary Layer Flow”,
Basim Al Tlua	“Experimental Wind Tunnel Testing and Numerical Optimization Studies for Airfoil Trailing-Edge Noise Reduction”,��
Yehia Salama	“Experimental and Numerical Investigation of Bio-Inspired Airfoil Trailing-Edge Designs for Noise Reduction”,��
Gerard Desmarais	“A Theoretical and Experimental Investigation on Ejector Acoustics and Ejector Silencer Design”,
Frank Giardino	“The Design, Fabrication, and Commissioning of a High-Speed Aeroacoustic Wind Tunnel for Studies of Surface Pressure Fluctuations Beneath Turbulent Boundary Layers”,
Steven Sonnenberg	“Reproducing Acceleration Power Spectral Density from an Aircraft Fuselage Panel excited by Turbulent Boundary Layer using Piezoelectric Actuators”,
John O’Keefe	“Design and Fabrication of an Automatic Traverse System for Wind Tunnel Testing”
Jared Van Blitterswyk	“Experimental Characterization of Turbulent Motions Using Wall-Pressure Measurements in Low Reynolds Number Turbulent Boundary Layers”,
Matthew Brezina	“Aeroacoustic Optimization of Flat-Plate Serrated Trailing-Edge Extensions for Broadband Noise Reduction”,
Ali Hassam	“Acoustics and Aeroacoustic Research Folder Characterization”
Raymond Greiss	“Numerical Investigations of Pathological Phonation Resulting From a Unilateral Sessile Polyp” (co-supervised with Dr. Edgar Matida),
Clement Ching	“Aircraft Wing Platform Design for Wind Tunnel Testing”
Timothy Rutke	“Wind Tunnel Anechoic Test Section Design”
Robert Williams	“Prediction and Assessment of the Surface-Based Aeroacoustics of Vertical-Axis Wind Turbines” (co-supervised with Dr. Edgar Matida and Dr. Fred Nitzsche),
Lejla Sjekirica	“Numerical Analysis of Panels’ Acoustic and Vibration Response”
David Rogers	“Anechoic Platform Design”
Jessica Mesquita	“Laboratory Inventory”
Praven Jose	“Numerical Simulation of An Aircraft Wing for Wind Tunnel Testing”
Gagandeep Arora	“Experimental Investigation of Phonation Mechanisms”

�Ӱ�ԭ��