| Published on 29-Mar-23 at 18:01 | Last updated 10-May-23 at 13:54 |
Student Theses
A. Costa, Deep Learning and Synthetic Imagery for Migratory Bird Species Identification Using Drones, Mechanical Engineering, December 2022. (Lalibert茅)
M. Palmer, Assessing Non-Planar Slicing and Carbon Fibre Filament Additives as Steps Towards 3D-Printed Drone Propellers, Aerospace Engineering, 杏吧原创 University, November 2022. (Lalibert茅)
S. Longtin-Martel, Optimisation et simulation de l鈥檃ile de l鈥橴AS-S45 de Hydra Technologies, ainsi que le d茅veloppement du simulateur de vol du Raptor de Tristar Multicopters, Master鈥檚 Thesis, Aerospace Engineering, 脡cole de technologie sup茅rieure, October 2022. (Botez)
S. Moses, Small Light Weight LiDAR Systems with Remotely Piloted Aircraft for Powerline Detection, Master鈥檚 Thesis, Aerospace Engineering, 杏吧原创 University, September 2022. (Lalibert茅)
M. Segui, CRJ700 regional aircraft performances optimization using adaptive winglet systems, PhD Thesis, Aerospace Engineering, 脡cole de technologie sup茅rieure, August 2022. (Botez)
M. Kanevsky, Improving Quality of 3D Printed Components for Remotely Piloted Aircraft Systems with Curved Layer Fused Filament Fabrication, Master鈥檚 Thesis, Aerospace Engineering, 杏吧原创 University, May 2022. (Lalibert茅)
D. Dozois, D茅veloppement de technologies utilisant un algorithme de cartographie et localisation simultan茅es et utilisant un algorithme de champ de potentiel permettant l鈥櫭﹙itement d鈥檕bstacles lors du pilotage d鈥檜n drone dans un chantier minier, Master鈥檚 Thesis, Electrical Engineering, Universit茅 de Sherbrooke, January 2022. (Desbiens)
P. Meyran, Conception d鈥檜ne ailette adaptative pour l鈥檕ptimisation des performances a茅rodynamiques de l鈥檃vion CRJ-700, Master鈥檚 Thesis, Aerospace Engineering, 脡cole de technologie sup茅rieure, January 2022. (Botez)
F. Atarita, Hyperspectral Imaging Simulator and Applications for Unmanned Aerial Vehicles, Master鈥檚 Thesis, Geological Sciences and Engineering, Queen鈥檚 University, September 2021. (Braun)
F. Faraj, Object Detection and Patern of Life Analysis from Remotely Piloted Aircraft System Acquired Full Motion Video, Master鈥檚 Thesis, Geological Sciences and Engineering, Queen鈥檚 University, June 2021. (Braun)
G. Tuta Navajas, Modelling and Pitch Control of a Re-Configurable Unmanned Airship, Master鈥檚 Thesis, Mechanical Engineering, University of Ottawa, April 2021. (Lanteigne)
J. Bass, Utilisation de la pouss茅e r茅versible pour faciliter les atterrissage de quadrirotors sur des surfaces inclin茅es, Master鈥檚 Thesis, Aerospace Engineering, Universit茅 de Sherbrooke, March 2020. (Desbiens)
Journal Publications
M.H. Negahban, M. Bashir, R. Botez, Free-Form Deformation Parameterization on the Aerodynamic Optimization of Morphing Trailing Edge, Applied Mechanics, February 2023.
M. Bashir, N. Zonzini, R. Botez, A. Ceruti, T. Wong, Flow Control around the UAS-S45 Pitching Airfoil Using a Dynamically Morphing Leading Edge (DMLE): A Numerical Study, Biomimetics, January 2023.
M. Bashir, N. Zonzini, R. Botez, A. Ceruti, T. Wong, Numerical Investigation of a Dynamically Morphing UAS-S45 Wing Airfoil at moderate Reynolds number, AIAA SCITECH 2023 Forum, January 2023.
M. Bashir, S. Longtin-Martel, R. Botez, T. Wong, Design of a Variable Camber Morphing Winglet with Composite Lamination Structural Analysis and Failure Analysis 鈥� Application to the UAS-S45, AIAA SCITECH 2023 Forum, January 2023.
M.H. Negahban, M. Bashir, R. Botez, Aerodynamic Optimization of a Novel Synthetic Trailing Edge and Chord Elongation Morphing: Application to the UAS-S45 Airfoil, AIAA SCITECH 2023 Forum, January 2023.
S. Longtin-Martel, M. Bashir, R. Botez, T. Wong, A Pareto Multi-Objective Optimization of a Camber Morphing Airfoil using Non-Dominated Sorting Genetic Algorithm, AIAA SCITECH 2023 Forum, January 2023.
M. Bashir, S. Longtin-Martel, N. Zonzini, R. Botez, A. Ceruti, T. Wong, Optimization and Design of a Flexible Droop Nose Leading Edge Morphing Wing Based on a Novel Black Widow Optimization (BWO) Algorithm 鈥� Part II, Designs, November 2022.
L. Catar, I. Tabiai, D. St-Onge, Additive Manufacturing Strategy for Ultra-Lightweight High Value-Added Components, The American Society of Mechanical Engineers, November 2022.
G. Tuta Navajas, E. Lanteigne, Modelling and Pitch Control of a Re-Configurable Unmanned Airship, Drone Systems and Applications, February 2022.
M. Bashir, S. Longtin-Martel, R. Botez, A. Ceruti, T. Wong, Optimization and Design of a Flexible Droop-Nose Leading-Edge Morphing Wing Based on a Novel Black Widow Optimization Algorithm 鈥� Part I, Designs, January 2022.
M. Bashir, S. Longtin-Martel, R. Botez, T. Wong, Aerodynamic Design and Performance Optimization of Camber Adaptive Winglet for the UAS-S45, AIAA SCITECH 2022 Forum, December 2021.
M. Bashir, S. Longtin-Martel, R. Botez, T. Wong, Aerodynamic Shape Optimization of Camber Morphing Airfoil based on Black Widow Optimization, AIAA SCITECH 2022 Forum, December 2021.
P. Meyran, H. Pain, R. Botez, J. Laliberte, Structural Design of a Morphing Winglet to optimize the Aerodynamic Performance of the CRJ-700 Aircraft, AIAA SCITECH 2022 Forum, December 2021.
Y. Tondji, G. Ghazi, R. Botez, CRJ 700 Aerodynamic Coefficients Identification in Dynamic Stall Conditions using Neural Networks, AIAA SCITECH 2022 Forum, December 2021.
M. Bashir, S. Longtin-Martel, R. Botez, T. Wong, Aerodynamic Design Optimization of a Morphing Leading Edge and Trailing Edge Airfoil 鈥� Application on the UAS-S45, Applied Sciences, February 2021.
Conference Proceedings
T. Krings, J. Lalibert茅, I. Borshchova, 鈥淐anadian Airspace Modeling鈥� Aerial Evolution Association of Canada 2022 Conference & Exhibition, Calgary AB, November 2022. Winner of Best Student Paper.
M. Palmer, J. Lalibert茅, 鈥淓ffects of Non-Planar Slicing Techniques and Carbon Fibre Material Additives on Mechanical Properties of 3D-Printed Drone Propellers鈥�, Aerial Evolution Association of Canada 2022 Conference & Exhibition, Calgary AB, November 2022. Winner of Best Student Presentation.
B. Zhou, J. Lalibert茅, 鈥淎 Novel Flapping Mechanism Design for a Hoverable Flapping Wing Micro Air Vehicle鈥�, Aerial Evolution Association of Canada 2022 Conference & Exhibition, Calgary AB, November 2022.
L. Catar, I. Tabiai, D. St-Onge, “Additive Manufacturing Strategy for Ultra-Lightweight High Value-Added Components鈥�, ASME 2022 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, St-Louis MO, August 2022.
M. Trott, B. Saddia, C. Pilsworth, R. Al Wardah, A. Surrette, A. Luthfian, T. Packulak,聽N. Nainwal, S. Mkhonto, M. Leybourne, R. Tinnion, K. Leseane, J. Kidder, R. Bowell, 鈥淲hen all’s Sed and Dune: Multidisciplinary Exploration Targeting in Ngamiland, Bostwana鈥�, The Prospectors & Developers Association of Canada 鈥� Next Generation Explorers Award, Toronto ON, June 2022.
A.F. Canales, R. Al Wardah, A. Braun, B. Vasily 鈥淐onstraining the Folding Geometry and Structural Control of Saint Lawrence Deposit using DC Resistivity, EM Surveys and LiDAR Imagery鈥�, The Prospectors & Developers Association of Canada 鈥� Society of Economic Geologists, Toronto ON, June 2022.
R. Al Wardah, M. Trott, B. Saddia, C. Pilsworth,聽A. Surrette, A. Luthfian, T. Packulak,聽N. Nainwal, S. Mkhonto, M. Leybourne, R. Tinnion, K. Leseane, J. Kidder, R. Bowell, 鈥淪eeing below the sand: Integrated Sed-Cu targeting in Ngamiland, Botswana鈥�, The Prospectors & Developers Association of Canada 鈥� Society of Economic Geologists, Toronto ON, June 2022.
L. Catar, I. Tabiai, D. St-Onge, 鈥淭owards the Characterisation of Microlattices Additive Manufacturing Techniques For Versatile Aerospace Structure Design鈥�, International Conference on Advanced Manufacturing for Air, Space and Land Transportation, Noordwijk, Netherlands, March 2022.
M. Bashir, S. Longtin-Martel, R. Botez, T. Wong, 鈥淎erodynamic design and shape optimization of the UAS-S45 camber adaptive winglet鈥�, AIAA Aviation Forum and Exposition 2022, San Diego, CA, January 2022.
M. Bashir, S. Longtin-Martel, R. Botez, T. Wong, 鈥淎erodynamic Shape Optimization of Camber Morphing Airfoil based on Black Widow Optimization鈥�, AIAA Aviation Forum and Exposition 2022, San Diego, CA, January 2022.
M. Bashir, S. Longtin-Martel, R. Botez, T. Wong, 鈥淎erodynamic Design and Performance Optimization of Camber Adaptive Winglet for the UAS-S45鈥�, AIAA Aviation Forum and Exposition 2022, San Diego, CA, January 2022.
R.P. Andrianantara, R. Botez, 鈥淎ircraft Engine Performance Model Identification using Artificial Neural Networks鈥�, AIAA Aviation Forum and Exposition 2021, Montreal QC, August 2021.
M. Bashir, S. Longtin-Martel, R. Botez, 鈥淣umerical Study of the Boundary Layer Behavior on Morphing Trailing Edge Wing using intermittency Transition model鈥�, AIAA Aviation Forum and Exposition 2021, Montreal QC, August 2021.
M. Segui, R. Botez, 鈥淓lectric Motor Modeling using Artificial Neural Networks: Application for Drones鈥�, AIAA Aviation Forum and Exposition 2021, Montreal QC, August 2021.
R.P. Andrianantara, R. Botez, 鈥淕eneral Electric CF34-8C5B1 Turbofan Parameter Estimation New Approach using Flight Tests and Artificial Neural Networks鈥�, Canadian Aeronautics and Space Institute, Ottawa ON, June 2021.
M. Bashir, S. Longtin-Martel, R. Botez, 鈥淎n extended assessment of camber morphing analysis for the aerodynamic performance of the UAS-S45 airfoil鈥�, Canadian Aeronautics and Space Institute, Ottawa ON, June 2021.
M. Segui, R. Botez, 鈥淚mprovement of the regional jet CRJ700 winglet design based on morphing wing principles鈥�, Canadian Aeronautics and Space Institute, Ottawa ON, June 2021.
S.M. Hashemi, R. Botez, 鈥淯AS-S4 Flight Dynamics Model Predictions based on Data Augmentation and Support Vector Regression鈥�, Canadian Aeronautics and Space Institute, Ottawa ON, June 2021.
Y. Tondji, R. Botez, 鈥淐RJ-700 Stall Dynamics Identification using Neural Networks鈥�, Canadian Aeronautics and Space Institute, Ottawa ON, June 2021.
Y. Tondji, R. Botez, 鈥淪tall Dynamics Identification using Neural Networks for the CRJ-700鈥�, MobiliT.AI Forum, Montreal QC, May 2021.
A. Stewart, F. Faraj, H. You, J. Plante, M. Lim, K. Kasa, A. Beauchamp, A. Webster, L. Martin-Boyd, K. Wong, A. Braun, A.J. Macdonald, 鈥淎 modular system for behaviour analytics from airborne full-motion video鈥�, International Society for Optics and Photonics, San Diego CA, April 2021.
M. Heath, D. St-Onge, 鈥淔rom bees to drones鈥�, IEEE Women in Engineering International Leadership Conference, Ottawa ON, June 2020.
M.H. Trad, M. Segui, R. Botez, 鈥淎irfoils Generation Using Neural Networks, CST Curves and Aerodynamic Coefficients鈥�, AIAA Aviation Forum and Exposition 2020, Orlando FL, June 2020.
M. Segui, R. Botez, A. Ceruti, 鈥淐essna Citation X Static Cruise Improvement using Morphing Wing Application on its Horizontal Tail鈥�, 8th European Conference for Aeronautics and Space Sciences (EUCASS), Madrid ES-MD, July 2019.
J. Bass, A.L. Desbiens, 鈥淧reliminary Design of a Highly Efficient VTOL System Based on Tethered Fixed-Wing Aircraft鈥�, 75th Forum of The Vertical Flight Society & Technology Display, Philadelphia PA, May 2019. Runner-up of Design Competition.