2026
|
| [91] |
Ossama Hafeez, Padmassun Rajakareyar, Mackenzie J. Reid and Mostafa S.A. ElSayed (2026), ‘Topology-Dependent Permeability in Cube Lattice: Simulation and Analysis‘, In AIAA SCITECH Forum 2026. |
| [90] |
Ossama Hafeez, Padmassun Rajakareyar, Mackenzie J. Reid and Mostafa S.A. ElSayed (2026), ‘Thermal Performance Analysis of Cube Lattice Structures Using Interface-Based CFD Metrics’, In聽AIAA SCITECH Forum 2026. |
| 2025 |
| [89] |
Ali, Ussama, Mohamed Okasha, Tarek Dief, Mostafa SA ElSayed, and Mohamed M. Kamra. “Blended Wing Body Designs for Aerodynamic, Stability, and Control Optimization: A Comprehensive Review.”聽Transportation Engineering聽(2025): 100397. |
| [88] |
Reid, Jackson, Denis Walch, and Mostafa SA ElSayed. “Modal Tuning for Reduced-Order Hybrid Stick Model Development.”聽Aerospace Science and Technology聽(2025): 110905. |
| [87] |
Rajakareyar, Padmassun, Hamza Abo El Ella, and Mostafa SA ElSayed. “Voxel-Based Asymptotic Homogenization of the Effective Thermal Properties of Lattice Materials with Generic Bravais Lattice Symmetry.”聽Symmetry聽17, no. 8 (2025): 1197. |
| [86] |
Bernard, Autumn R., Muhammet Muaz Yalcin, and Mostafa SA ElSayed. “Crashworthiness investigations for 3D printed multi-layer multi-topology carbon fiber nylon lattice materials.”聽Journal of Reinforced Plastics and Composites聽44, no. 11-12 (2025): 634-649. |
| [85] |
Okutan, Mustafa Said, Muhammet Muaz Yal莽谋n, Mostafa SA ElSayed, and Kenan Genel. “Lateral Deformation Behavior of Internally Fin-Stiffened Tubes.”聽International Journal of Mechanical Sciences聽(2025): 110446. |
| 2024 |
| [84] |
Al Kuwaiti, Maryam, Amir Hussain Idrisi, Asima Zahoor, Mostafa SA ElSayed, Dinu Thomas Thekkuden, and Abdel-Hamid I. Mourad. “Impact of compaction process on the carbon epoxy composite under varied environmental conditions.”聽Scientific reports聽14, no. 1 (2024): 31864. |
| [83] |
Babu, Sandeep Suresh, Mostafa SA ElSayed, and Abdel-Hamid Ismail Mourad. “Extended Dummy Node Rule for analysis and characterization of pin-jointed periodic cellular materials: An approach based on Bloch-wave method.”聽Mathematics and Mechanics of Solids聽(2024): 10812865241288777. |
| [82] |
Bernard, A. R., Yal莽谋n, M. M., & ElSayed, M. S. (2024). Crashworthiness Investigations for 3D-Printed Multi-Layer Multi-Topology Engineering Resin Lattice Materials.聽Materials,听17(19), 4844. |
| [81] |
Bernard, A. R., Yalcin, M. M., & ElSayed, M. S. (2024). Shape transformers for crashworthiness of additively manufactured engineering resin lattice structures: Experimental and numerical investigations.聽Mechanics of Materials,听190, 104925. |
| [80] |
Bernard, A. R., Yalcin, M. M., & ElSayed, M. S. (2024). Crashworthiness investigations for 3D printed multi-layer multi-topology carbon fiber nylon lattice materials.聽Journal of Reinforced Plastics and Composites, 07316844241226834. |
| [79] |
Bernard, A. R., & ElSayed, M. S. (2024). Design, Manufacturing, and Analysis of Periodic Three-Dimensional Cellular Materials for Energy Absorption Applications: A Critical Review.聽Materials,听17(10), 2181. |
| [78] |
Bernard, A. R., & ElSayed, M. S. (2024). Crashworthiness of 3D Lattice Topologies under Dynamic Loading: A Comprehensive Study.聽Materials,听17(7), 1597. |
| 2023 |
| [77] |
Rajakareyar, P., ElSayed, M. S., Abo El Ella, H., & Matida, E. (2023). Effective Mechanical Properties of Periodic Cellular Solids with Generic Bravais Lattice Symmetry via Asymptotic Homogenization.聽Materials,听16(24), 7562. |
| [76] |
Walker, P., ElSayed, M. S., & Kabir, A. S. (2023). A comparative study of the fatigue behavior of Ti鈥�6Al鈥�4V circular lattices using numerical and experimental methods.聽Fatigue & Fracture of Engineering Materials & Structures,听46(9), 3477-3486. |
| [75] |
Gasparetto, V. E., Reid, J., & ElSayed, M. S. (2023). Passive-tuned mass dampers for the pointing accuracy mitigation of VLBI earth-based antennae subject to aerodynamic gust.聽Applied Mechanics,听4(3), 816-840. |
| [74] |
Zaareer, M. N., Mourad, A. H. I., Darabseh, T., Abdullah, K., & ElSayed, M. S. (2023). Aeroacoustics wind noise optimization for vehicle’s side mirror base.聽International Journal of Thermofluids,听18, 100332. |
| [73] |
Ramachandran, T., Mourad, A. H. I., & ElSayed, M. S. (2023). Nb2CTx-based MXenes most recent developments: from principles to new applications.聽Energies,听16(8), 3520. |
| [72] |
Kumar, S. M., Okasha, M., ElSayed, M. S., Des Cotes, R., Aasim, W. F. A. W., Deif, A., & Mourad, A. H. I. (2023, February). Dynamic Stability of a Blended Wing Body Unmanned Aerial Vehicle. In聽2023 Advances in Science and Engineering Technology International Conferences (ASET)聽(pp. 1-9). IEEE. |
| [71] |
MM Yal莽谋n, MSA ElSayed, “Experimental Investigation of Lateral Crushing Behavior of Circular Tubes with Different Cross-Sectional Geometries” SILK ROAD 2. International Scientific Research Congress, September 26-27 |
| [70] |
Nieto, M. G., Babu, S. S., ElSayed, M. S., & Mourad, A. H. I. (2023). A Comparative Analysis of the Response-Tracking Techniques in Aerospace Dynamic Systems Using Modal Participation Factors.聽Applied Mechanics,听4(4), 1038-1065. |
| [69] |
Gasparetto, V. E., Reid, J., Parsons, W. P., ElSayed, M. S., Saad, M., Shieldand, S., … & Hilliard, L. M. (2023). Multi-objective Design optimization of multiple tuned Mass Dampers for attenuation of dynamic aeroelastic response of Aerospace structures.聽Aerospace,听10(3), 235. |
| [68] |
Bernard, A. R., Yalcin, M. M., & ElSayed, M. S. (2023). Development of numerical model for the crashworthiness of additively manufactured sandwich lattices. In聽AIAA SCITECH 2023 Forum聽(p. 2200). |
| [67] |
Parsons, W. P., Gasparetto, V. E., ElSayed, M. S., Saad, M., Shield, S., Brown, G. L., & Hilliard, L. M. (2023). Multi-objective Design Optimization of Structural Geometric Nonlinearities for Response Attenuation of VLBI Antennae Subject to Aerodynamic Turbulence.聽Journal of Vibration Engineering & Technologies,听11(1), 53-70. |
| 2022 |
| [66] |
Parisien, Ariane, Mostafa SA ElSayed, and Hanspeter Frei. “Mechanoregulation modelling of stretching versus bending dominated periodic cellular solids.”聽Materials Today Communications聽33 (2022): 104315. |
| [65] |
Parsons, W. P., Gasparetto, V. E., ElSayed, M. S., Saad, M., Shield, S., Brown, G. L., & Hilliard, L. M. (2022). Dynamic aeroelastic performance optimization of adaptive aerospace structures using structural geometric nonlinearities.聽Journal of Aerospace Engineering,听35(6), 04022089. |
| [64] |
Sudasinghe, A., Rajakareyar, P., Matida, E., Abo El Ella, H., & ElSayed, M. S.A. (2022). Aerodynamic Shape Optimization of an Aircraft Propulsor Air Intake with Boundary Layer Ingestion. Applied Mechanics,听3(3), 1123-1144. |
| [63] |
Parisien, Ariane, Mostafa SA ElSayed, and Hanspeter Frei. “Mature bone mechanoregulation modelling for the characterization of the osseointegration performance of periodic cellular solids.”聽Materialia聽25 (2022): 101552. |
| [62] |
T. Koukoulas, L. Wu and R. Green, K. Munro, A. Bouchard W.H. Cho, R. St-Gelais, T. Hodges, M. Stephan, S. Nelanuthala, M.S.A. ElSayed, 鈥淢easurement Considerations and Challenges on Infrasound Sensing Using a Combined Acoustic Wave and Optical Approach鈥�, 28th International Congress on Sound and Vibration (ICSV28) |
| [61] |
Parisien, Ariane, et al. “Subsidence of spinal fusion cages: a systematic review.”聽International Journal of Spine Surgery聽16.6 (2022): 1103-1118. |
| [60] |
Trudel, Eric, and Mostafa SA ElSayed. “Penalization techniques for fatigue鈥恇ased topology optimizations of structures with embedded functionally graded lattice materials.”聽International Journal for Numerical Methods in Engineering聽123.9 (2022): 1991-2011. |
| [59] |
Bernard, Autumn R., and Mostafa S. ElSayed. “Impact Resistance and Specific Energy Absorption Efficiency Limits of Periodic Cellular Solids.”聽AIAA SCITECH 2022 Forum. 2022. |
| [58] |
Reid, Jackson G., and Mostafa S. ElSayed. “Multiscale Design Optimization with Integrating Overhang Constraints for Additively Manufactured Lattice Structures.” AIAA SCITECH 2022 Forum. 2022. |
| 2021 |
| [57] |
Al-Sukhon, Ayman, and Mostafa SA ElSayed. “Design optimization of hopper cars employing functionally graded honeycomb sandwich panels.” Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit 236.8 (2022): 920-935. |
| [56] |
Gasparetto, V.E.L.; ElSayed, M.S.A. Multiscale Modelling and Mechanical Anisotropy of Periodic Cellular Solids with Rigid-Jointed Truss-Like Microscopic Architecture.聽Appl. Mech. (2021), 2, 331-355. https://doi.org/10.3390/applmech2020020 |
| [55] |
Trudel, E., ElSayed, M.S.A. Global multiscale design optimization of procedural lattice structures for fatigue enhancement. Multiscale and Multidiscip. Model. Exp. and Des. (2021). https://doi.org/10.1007/s41939-021-00095-5 |
| [54] |
Trudel, Eric, Peter Walker, Shaza Nosir, and Mostafa SA ElSayed. “Experimental Optimization for Fatigue Life Maximization of Additively Manufactured Ti-6Al-4V Alloy Employing Ultrasonic Impact Treatment.” Journal of Materials Engineering and Performance 30, no. 4 (2021): 2806-2821. |
| [53] |
Trudel, Eric, and Mostafa SA ElSayed. “Conformal Wireframe Nets for Trimmed Symmetric Unit Cells in Functionally Graded Lattice Materials.” MDPI – Applied Mechanics 2.1 (2021): 81-107. |
| [52] |
Gasparetto, Victor EL, and Mostafa SA ElSayed. “Shape transformers for phononic band gaps tuning in two-dimensional bloch-periodic lattice structures.” European Journal of Mechanics-A/Solids (2021): 104278. |
| [51] |
Gasparetto, Victor EL, and Mostafa SA ElSayed. “Multiscale optimization of specific elastic properties and microscopic frequency band-gaps of architectured microtruss lattice materials.” International Journal of Mechanical Sciences 197 (2021): 106320. |
| [50] |
William Parsons, Mostafa SA ElSayed, Mohamed Saad, Stephen Shield. 鈥淕eometric Nonlinearities for Tuning and Control of the Dynamic Response of Flexible Structures鈥�, In AIAA Scitech 2021 Forum, Jan. 2021. |
| [49] |
Victor EL Gasparetto, Mostafa SA ElSayed, Mohamed Saad, Stephen Shield. 鈥淪hape transformers for band gaps customization of Bloch-periodic triangular lattice structures鈥�, In AIAA Scitech 2021 Forum, Jan. 2021. |
| 2020 |
| [48] |
Al-Sukhon, Ayman, and Mostafa SA ElSayed. “Fluid-Structure Interaction for the Multidisciplinary Design Optimization of Hopper Cars Employing Honeycomb Sandwich Composites.” In AIAA Scitech 2020 Forum, p. 1633. 2020. |
| [47] |
Reid, Mac, Chase Sun, and Mostafa SA ElSayed. “Topology Optimization of Heat Sinks for High Efficiency Electronics Employing Simplified Convection Model.” In AIAA Scitech 2020 Forum, p. 2263. 2020. |
| 2019 |
| [46] |
Walker, Peter, Sinah Malz, Eric Trudel, Shaza Nosir, Mostafa SA ElSayed, and Leo Kok. “Effects of ultrasonic impact treatment on the stress-controlled fatigue performance of additively manufactured DMLS Ti-6Al-4V alloy.”聽Applied Sciences聽9, no. 22 (2019): 4787. |
| [45] |
Nieto, Michelle Guzman, Paul V. Thomas, Mostafa SA ElSayed, Mohamed Saad, Gary L. Brown, and Lawrence M. Hilliard. “Development of Efficient Dynamic Aeroelasticity Model for High Fidelity Pointing Accuracy Assessment of VLBI Earth-Based Radio Antennas.”聽International Journal of Aeronautical and Space Sciences聽(2019): 1-14. |
| [44] |
Shahrazad Taher, Fred F. Afagh and Mostafa S.A. ElSayed., “Design and Characterization of Microstructured Tensegrity Lattice Materials as a New Candidate for Skin Panels of Morphing Aircraft Wings.”,听Aero2019 Canadian Aeronautics and Space Institute Conference May 14-16, 2019, Laval, QC. |
| [43] |
Peter Walker, Abu Syed Kabir and Mostafa S.A. ElSayed., “EFFECT OF BUILD DIRECTION ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF SELECTIVE LASER MELTED TI-6AL-4V ALLOY.”, Aero2019 Canadian Aeronautics and Space Institute Conference May 14-16, 2019, Laval, QC. |
| [42] |
Ayman Al-Sukhon and Mostafa S.A. ElSayed., “MULTISCALE DESIGN OPTIMIZATION OF ECO-EFFICIENT FREIGHT RAILCARS EMPLOYING LIGHTWEIGHT HONEYCOMB SANDWICH PANELS.”,听Aero2019聽Canadian Aeronautics and Space Institute Conference May 14-16, 2019, Laval, QC. |
| [41] |
M. A. A. Salman, Mostafa S.A. ElSayed and聽Denis Walch., “Nonlinear Dynamic Aeroelasticity Response Analyses of Very Flexible Aircraft at Conceptual Design Stage: a Sensitivity Study.”聽Aero2019聽Canadian Aeronautics and Space Institute Conference May 14-16, 2019, Laval, QC. |
| [40] |
Michelle Guzman Nieto, Paul V. Thomas, Mostafa S.A. ElSayed,听Mohamed Saad, Gary L. Brown and Lawrence M. Hilliard. “Dynamic Aeroelasticity Response Analysis and Pointing Accuracy Assessment of VLBI High Precision Ground Antennas Subject to Aerodynamic Gust.”,听Aero2019聽Canadian Aeronautics and Space Institute Conference May 14-16, 2019, Laval, QC. |
| [39] |
Ze Feng Gan, Justin Bisson, Jiajun Feng, Fidel Khouli*, Mostafa S.A. ElSayed, Fred Nitzsche. “Development and Optimization of Flight Dynamics, Control Laws and Avionics System for a UAV with a Multi-scale Optimized Blended Wing Body Configuration.”聽Aero2019聽Canadian Aeronautics and Space Institute Conference May 14-16, 2019, Laval, QC. |
| [38] |
Jason Millar, Udit Sapre, Ryan Miller, Kieran Lee, Samantha Mosca, Mostafa S.A. ElSayed, Fidel Khouli, and Fred Nitzsche. ”Integrated Dynamic Aeroelasticity Response Analyses and Multiscale Design Optimization of Unmanned Aerial Vehicle with Blended Wing Body Configuration.” Aero2019聽Canadian Aeronautics and Space Institute Conference May 14-16, 2019, Laval, QC. |
| [37] |
Thomas, Paul Vazhayil, Mostafa SA ElSayed, and Denis Walch. “Development of high fidelity reduced order hybrid stick model for aircraft dynamic aeroelasticity analysis.” Journal of聽Aerospace Science and Technology (2019).聽 doi.org/10.1016/j.ast.2019.02.030 |
| [36] |
MG Nieto, MSA ElSayed, D Walch, Efficient Global Optimization and Modal Strain Energy Coefficient Based-Algorithm for Fast Prediction of Dynamic Aeroelastic Loads,听Journal of Structural and Multidisciplinary Optimization. Journal of聽Structural and Multidisciplinary Optimizatio苍.听诲辞颈.辞谤驳/10.1007/蝉00158-019-02239-1听 |
| [35] |
Trudel, Eric P., Mostafa S.A. ElSayed, Leo Kok, and Emmanuel Provost. “Multiscale Design Optimization of Additively Manufactured Aerospace Structures Employing Functionally Graded Lattice Materials.” In聽AIAA Scitech 2019 Forum, p. 0420. 2019. |
| [34] |
Dinovitzer, Malcolm, Calvin Miller, Adam Hacker, Gabriel Wong, Zach Annen, Padmassun Rajakareyar, Jordan Mulvihill, and Mostafa S.A. ElSayed. “Structural Development and Multiscale Design Optimization of Additively Manufactured UAV with Blended Wing Body Configuration Employing Lattice Materials.” In聽AIAA Scitech 2019 Forum, p. 2048. 2019.Forum. 2019. |
| [33] |
Malz, Sinah, Shaza Nosir, Eric P. Trudel, Mostafa S.A. ElSayed, Leo Kok, and Emmanuel Provost. “Effect of Ultrasonic Impact Treatment on the Stress-Controlled Fatigue Performance of Additively Manufactured Ti-6Al-4V Alloy.” In聽AIAA Scitech 2019 Forum, p. 0414. 2019. |
| 2018 |
| [32] |
Thomas, Paul Vazhayil, Mostafa SA ElSayed, and Denis Walch. “Review of Model Order Reduction Methods and Their Applications in Aeroelasticity Loads Analysis for Design Optimization of Complex Airframes.”聽Journal of Aerospace Engineering聽32, no. 2 (2018): 04018156. |
| [31] |
Salman, Muhammadh Ali A., Mostafa SA ElSayed, and Denis Walch. “Structural Nonlinearities and their Impact on the Fidelity of Critical Steady Maneuver Loads and Trimming Con figuration of Very Flexible Airframes.”聽Journal of Aeroelasticity and Structural Dynamics聽6, no. 1 (2018). |
| [30] |
Paul V. Thomas, Mostafa S. A. ElSayed and Denis Walch. 鈥淢odel Order Reduction of Complex Airframes Using Component Mode Synthesis for Dynamic Aeroelasticity Load Analysis鈥�, Journal of Mechanics and Automation 8.4, (2018). |
| [29] |
MG Nieto, MSA ElSayed, D Walch, Improved Modal Contribution Factors as Response Tracking Mechanisms for Dynamic Systems During Design Optimization, CSME International Congress 2018, May 27-30, 2018, Toronto, On, Canada, (2018) |
| [28] |
MG Nieto, MSA ElSayed, D Walch, Modal Participation Factors and their Potential Applications in Aerospace: a Review, CSME International Congress 2018, May 27-30, 2018, Toronto, On, Canada, (2018) |
| [27] |
TV Nong, MSA ElSayed, T Letellier, Low-Velocity Impact Response and Experimental Optimization of Modified Fiber Metal Laminates with Integrated Mechanical Interlock Bonding System, CSME International Congress 2018, May 27-30, 2018, Toronto, On, Canada, (2018) |
| [26] |
Nong, Tran鈥怴u, Mostafa SA ElSayed, and Camille Biseul. “Experimental optimization and static characterization of modified fiber metal laminates with integrated mechanical interlock bonding system for aerospace applications.” Journal of聽Polymer Composites.听诲辞颈.辞谤驳/10.1002/辫肠.24891 |
| [25] |
S Mareishi, MSA ElSayed, FF Afagh, Design Optimization of Dental Implant Using Additively Manufactured Lattice Materials, CMBBE 2018 – 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (2018). |
| 2017 |
| [24] |
Miller, M., Nguyen, V., Lee Slew, K., Greiss, R., Li, L., Huang, X., ElSayed, MSA, Matida, E. 鈥淎 Preliminary investigation of fiber-metal-laminates with grip metal鈥�, cancom2017 – Canadian international conference on composite materials, July 17-20, (2017). |
| 2016 |
| [23] |
Mostafa S.A. ElSayed and Damiano Pasini, 鈥淢echanics of 2D Pin Jointed Lattice Structures鈥�, AES-ATEMA International Conference Series – Advances and Trends in Engineering Materials and their Applications, pp. 73-80, 10-14 October (2016). |
| 2013 |
| [22] |
ElSayed, Mostafa SA, Miguel Alejandro Gutierrez Contreras, and Nicholas Stathopoulos. “Monitor Points Method for Loads Recovery in Static/Dynamic Aeroelasticity Analysis with Hybrid Airframe Representation.”聽SAE International Journal of Aerospace聽6.2013-01-2142 (2013): 399-407. |
| 2012 |
| [21] |
Elsayed, Mostafa SA, and Damiano Pasini. “Comprehensive stiffness of prestressed lattice materials.”聽Journal of Materials Science Research聽1.2 (2012): 87. |
| 2011 |
| [20] |
D. Bacheva,听MSA El Sayed, R.S.Trask, 鈥淭he Skeleton of Euplectella Aspergillum as Foundation for the Development of Novel Composite Aerospace Structures鈥�, 18th International Conference on composite materials, 21-26, Jeju, Korea, August 2011 |
| 2010 |
| [19] |
Elsayed, Mostafa SA.聽Multiscale mechanics and structural design of periodic cellular materials. Diss. McGill University Library, 2010. |
| [18] |
Elsayed, Mostafa SA, and Damiano Pasini. “Analysis of the elastostatic specific stiffness of 2D stretching-dominated lattice materials.”聽Mechanics of Materials聽42.7 (2010): 709-725. |
| [17] |
Elsayed, Mostafa SA, and Damiano Pasini. “Multiscale structural design of columns made of regular octet-truss lattice material.”聽International Journal of Solids and Structures聽47.14-15 (2010): 1764-1774. |
| [16] |
Chintapalli, Sridhar, et al. “The development of a preliminary structural design optimization method of an aircraft wing-box skin-stringer panels.”聽Aerospace Science and Technology14.3 (2010): 188-198. |
| [15] |
Elsayed, Mostafa SA, and Damiano Pasini. “Theoretical and experimental characterization of the 34.6 2D lattice material.”聽ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2010. |
| 2009 |
| [14] |
A. Elsayed, Mostafa S., Ramin Sedaghati, and Mohammed Abdo. “Accurate stick model development for static analysis of complex aircraft wing-box structures.”聽AIAA journal聽47.9 (2009): 2063-2075. |
| [13] |
Elsayed, Mostafa SA, and Damiano Pasini. “The Bloch鈥檚 Theorem.” (2009). |
| [12] |
Elsayed, Mostafa SA, and Damiano Pasini. “Characterization and performance optimization of 2D lattice materials with hexagonal Bravais lattice symmetry.”聽ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2009. |
| [11] |
Elsayed, Mostafa SA, and Damiano Pasini. “Mechanics of 2D Pin Jointed Lattice Structures.”聽AES Technical Reviews, Part B: International Journal of Advances in Mechanics and Applications of Industrial Materials聽1.1 (2009): 83-91. |
| [10] |
Elsayed, Mostafa SA, H茅bert Cl茅ment, and Damiano Pasini. “Structural analysis of pin jointed lattice structures.”聽3rd international conference on advances and trends in engineering materials and their applications, AES-ATEMA. 2009. |
| 2008 and before |
| [9] |
MSA ElSayed聽and Damiano Pasini 鈥淢ulti-Scale Model of the Effective Properties of the Octet-Truss Lattice Material鈥�, AIAA Technical Conferences, Victoria, BC, Canada, September 10-12, 2008. |
| [8] |
MSA ElSayed, Ramin Sedaghati and Mohammed Abdo 鈥淣ew Approach for Generating Beam Models of Complex aircraft wing-box Structures Used for Static Aero-elasticity鈥�, The Canadian Aeronautics and Space Institute Conference- CASI 2007 (Aero 07). April 2007. |
| [7] |
聽Elsayed, Mostafa SA, et al. “WING鈥揃OX STRUCTURAL DESIGN OPTIMIZATION.” Rept. 8 (2007). |
| [6] |
Abd-Elwahab, Mostafa, and Hany A. Sherif. “Pre-tensioned layer damping as a new approach for vibration control of elastic beams.”聽Journal of vibration and acoustics聽128.3 (2006): 338-346. |
| [5] |
Elsayed, Mostafa SA, et al. “WING鈥揃OX STRUCTURAL DESIGN OPTIMIZATION.” Rept 7 (2006). |
| [4] |
Elsayed, Mostafa SA, Amandeep Sing, and Ramin Sedaghati. “3D Finite Element Model of DLR-F6 Aircraft Wing-Box Structure, Created in PATRAN and Analyzed in NASTRAN.”聽MOSAIC Project, Rept聽6. 2006 |
| [3] |
MSA ElSayed, H.A. Sherif and A.A. Omer, 鈥淣ew Approach for Vibration Control of a Cantilevered Beam鈥�, 10th International Conference On Aerospace Sciences And Aviation Technology, Technical College, Cairo Egypt, pp. 527-537, 13-15 May, 2003. |
| [2] |
MSA ElSayed聽and H.A. Sherif 鈥淪mart Control of Base Excited Cantilevered Beam Using Active Constrained Layer Damping鈥�, 10th International Conference On Applied Mechanics And Mechanical Engineering, Technical College, Cairo Egypt, pp. 154-160, 14-16 May, 2002. |
| [1] |
MSA ElSayed, 鈥淎ctive and Passive Control of Mechanical Vibration of Cantilever Beam鈥�, Master of Applied Science Thesis, Department of Mechanical Engineering, Military Technical College, Cairo, Egypt, (2001). |
