杏吧原创

Biography

Research Interests

• Processing and testing of composites and fibre metal laminate airframe materials;
• Design of uninhabited aerial vehicles (UAVs) and micro aerial vehicles (MAVs);
• Low velocity impact modelling and testing for composites;
• Biomimetic and bio-inspired structures for air vehicles.

Research

My research focuses on novel aircraft structures, composite materials and hybrids and next generation air vehicle concepts (e.g. UAVs and MAVs).

Most recently I have workded on project on fibre metal laminate (FML)processing, micro aerial vehicle (MAV) structures and the qualification of primary composite airframe structures.

From 2001 to 2008 I was a Research Officer with the Structures Group and then the Composites and Novel Airframe Materials (CANAM) Group of the National Research Council Institute for Aerospace Research (NRC-IAR). For the last few months of my time at NRC I had the opportunity to lead the Composites Team within the CANAM Group. During this time I continued my research on FMLs, conceiving and leading an in-house project entitled Advanced Processing for FMLs in which we developed improved processing methods to reduce residual stresses in the laminates to improve fatigue life. My colleagues on this project also worked on the development of new non-destructive inspection methods and an improved fracture mechanics model for FMLs. During this time I have also led or co-led several large projects on next generation composite primary structures for aircraft with a number of Canadian OEMs including the Bonded Wing Survivabilty Demonstration with Bell Helicopter Textron, DRDC-Valcartier, Concordia, Ecole Polytechnique, IAR-AMTC, TPC, CRIAQ and Pratt and Whitney Canada.

During this time my other main activity area was the study of uninhabited aerial vehicle (UAV) structures. This has included work on full size vehicles and also on biomimetic structures for MAVs with Dr. Marcias Martinez (NRC), Prof. Jeff Dawson (杏吧原创) and Ms. Katharina Schnackenburg.

From 1998 to 2001 I was a guest worker at the NRC-IAR while I completed my PhD work and supported other activities mainly with Bombardier Aerospace on the testing and qualification of hybrid fibre metal laminates (FMLs). My doctoral research was on the experimental and numerical investigation of low-velocity impact damage in fibre-metal laminates (FMLs).

In 2005-2007 I served on the organizing committe for the Inagural UVS Canada Student UAV Compeition. I was Local Organizing Committee Co-Chair with Ms. Laura Petrescue for the 4th Canadian-International Composites Conference (CANCOM 2003) held in Ottawa in August 2003. I was also a conference volunteer for CANCOM 2001 in Montreal. Over the years I have served as a session developer for a number of other CANCOM and CASI conferences. From 2006 to 2008 I was the Canadian Air Force representative on The Technical Cooperation Program (TTCP) Polymer Composites Panel (MAT-TP-7). From 2006 to 2008 I was an Adjunct Research Professor at 杏吧原创 University.

Research

Composite and hybrid (e.g. fibre metal laminates) manufacturing and processing, mechanical properties of composite and hybrid materials; bonded and bolted composite structures; aircraft design; uninhabited aerial vehicle (UAV) and micro-aerial vehicle (MAV) design; application of finite element analysis to assess impact damage in fibre metal laminates and composites; biologically inspired and bio-mimetic structures and materials for aerospace applications.

Activities

Member, Technical Committee, International SAMPE Symposium and Exhibition 2010, Seattle, WA, 17-20 May 2009

Journal Articles

Couture, A, Lalibert茅, J and Li, C. 鈥淢ode I Fracture Toughness of Aerospace Polymer Composites Exposed to Fresh and Salt Water鈥� Chemical and Materials Engineering, v. 1, n. 1, June 2013.

Lalibert茅, J, Kraemer, K, Dawson, J and Miyata, D. 鈥淒esign and Manufacturing of Biologically Inspired MAV Wings Using Rapid Prototyping鈥�, International Journal of Micro Aerial Vehicles, v. 5, n. 1, March 2013.

J. Lalibert茅, P.V. Straznicky, and C. Poon (2005), 鈥淚mpact Damage in Fiber Metal Laminates,鈥� AIAA Journal 43(11): 2445-2462.

Conference Publications

Mahmud, K, Laliberte, J, and Benyamin-Seeyar, A. 鈥溾�楽aviour鈥� Unmanned Aerial and Ground Vehicle System for Surveillance, Detection and Detonation of Improvised Explosive Devices鈥�, USC Annual Conference, Quebec City, November 2011

Couture, A, Li, C and Laliberte, J 鈥淎ssessment of environmental degradation of bond in composite sandwich structure using Single Cantilever Beam Test鈥�, CASI AERO鈥�11, Montreal, QC, April 2011.

Mahendran, M, Shashank, P, Straznicky, PV and Lalibert茅, J. 鈥淔easibility Study on Closed Cavity Bag Moulding (CCBM) for Novel Mouldless Manufacturing of Carbon Epoxy Composites鈥� Canadian Aeronautics and Space Institute (CASI) AERO 2009 Conference, Ottawa, May 2009.